Advertisement
Step by step assembly instructions
Step One
Attach the Side Rails (3) to the Headboard (1) and Footboard (2) using Washer (A) and
M6 x 25mm Bolt (C). Tighten using Allen Key (F) as shown in the diagram below.
1
Step Two
Place the Cross Bar (5) onto the Side Rails (3) and secure using M6 x 20mm Bolt (B) and
M6 Nut (D). Tighten using Allen Key (F) as shown below.
Note: In order to attach the Cross Bar (5) please ensure
the Side Rails (3) are assembled correctly.
3
Note: Please ensure the Side Rails (3) are assembled correctly,
there is a label indicating the left and right hand side.
Repeat this for all 4 corners.
2
3
3/5
A
C
F
Advertisement
