Table of Contents
Advertisement
4
CONNECTION TO INSTRUMENT/CONTACTS
The log/temp transducer connects to the FI-30 Server or directly to the FI-30 Speed
Log.
The transducer cable is clearly marked with No 1 and the colours will correspond to
input screw terminal on the Server.
If the 8 m transducer cable needs to be cut, use the extra cable protectors supplied.
Press the protectors on to each wire with a pair of flat pliers.
5
CALIBRATION
Calibration is carried out in the Multi Control instrument or the speed log instrument
(see manual).
6
TECHNICAL DATA
Dimensions:
Transducer cable:
Power suppIy:
Power consumption:
Accuracy:
Speed range
Temperature range
Through-hull fitting 51 x
86 mm (1 5/8" x 3 3/8")
Hull thickness min 6 mm
(3/8"), max 42 mm (1 5/8")
8 m (26.2 ft)
12V DC (10-16V)
0.06 W
± 1%
0.2-30 knots (depending on transducer type max. 90 knots)
Operating -10°C to +70°C
Storage -35°C to +70°C
13
Advertisement
Table of Contents
