Advertisement
4
Electric installation
4.1
Connections to the FI-30 Server
If you already have a Nexus Network i.e. a Server, it is more practical to connect the
transducer to the Server due to the single instrument cable installation. Note, set C71
OFF (see Multi Control Manual)
Server
4.2
Installing cable
The power cable is connected via a 3A fuse from the battery or at the boats fuse panel
and direct to the instrument or Server. One red and one black power wire is included.
Note, set C71 On (see Multi Control Manual)
Always connect a 3 AMP fuse between Power supply and instrument.
4
Transducer
Advertisement
