Table of Contents
Advertisement
A-2
# make modules_install
# mkdinitrd /boot/initrd.2.4.18.img 2.4.18
# cp /usr/src/linux/System.map /boot/System.map-2.4.18-irqbal
# cd /boot
# ln -s System.map-2.4.18-irqbal System.map
# add following entries to /etc/lilo.conf
image=/boot/vmlinuz-24188irqbal
label=lin24188irqbal
initrd=/boot/initrd-2.4.18.img
read-only
root=/dev/hda2
# lilo
# reboot
How to access system memory in excess of 4GB for Microsoft
Windows 2000 Advanced Workstation and Datacenter
Workstation
Microsoft Windows 2000 Advanced Workstation and Datacenter Workstation support
memory in excess of 4GB of RAM by way of the Intel Physical Addressing Extension
(PAE) specification. Windows 2000 Advanced Workstation is limited to 8GB, and
Windows 2000 Datacenter Workstation is limited to 64GB.
You can enable PAE in the "Boot.ini" file. To enable PAE, follow these steps:
1.
Locate the Boot.ini file, typically in the root folder (for example, C:) and
remove its read-only attribute.
2.
Open the Boot.ini file, and then add the /PAE parameter to the ARC path, as
shown in bold format in the following example:
multi(0)disk(0)rdisk(0)partition(2)\WINNT= "Windows 2000 Advanced
Workstation" /PAE /basevideo /sos
3.
On the File menu, click Save.
4.
Restore the read-only attribute to the Boot.ini file.
WI-2Pa
Appendix A
Advertisement
Table of Contents
