Table of Contents
Advertisement
Maintenance
• Before cleaning the washer interior, unplug the electrical power cord to avoid electrical shock hazards.
• Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday), especially if
there is no floor drain(gully) in the immediate vicinity.
■ The water inlet filter
• "
" icon will be displayed on the control panel when water does not enter the detergent drawer.
• If water is very hard or contains traces of lime deposit, the water inlet filter may become clogged
It is therefore a good idea to clean it from time to time.
28
1.Turn off the water tap.
2.Unscrew the water inlet hose.
3.Clean the filter using a hard bristle brush.
4.Tighten up the inlet hose.
Advertisement
Table of Contents
