Remote Control - Fujitsu Plasmavision P37FT05AUB User Manual

PART NAMES AND FUNCTIONS (Continued)

REMOTE CONTROL

For details, see page .
Note
• When the buttons are lighted by pressing
E-10
(POWER button)
Press to switch between Power On and Standby.
(LIGHT button)
Press to light the buttons of the remote control.
When no operation is performed, lighting of the buttons goes off after 8 seconds.
(FINE mode button)
Press to switch the Picture Mode.
(WIDE button)
Press to switch to a desired wide screen.
(DISPLAY button)
Press to display the channel, input mode, and screen size status.
The status is displayed for about five seconds.
(PICTURE MEMORY button)
Press to recall the Picture Memory.
(OFF-TIMER button)
Press to specify the length of time until the power automatically turns off (stand-by
state).
(INFORMATION button)
Press to display the current channel information.
(TV button)
Press to watch TV broadcasting.
(VIDEO button)
Press to switch from VIDEO1 through VIDEO6.
(RGB button)
Press to select RGB1.
,
Press to directly select a channel.
(CHANNEL RETURN button)
Press to return to the previous channel, Video mode, or RGB mode.
or (Channel Up/Down buttons)
Press to select the preset programs.
(MTS/STEREO button)
Press to select the audio mode such as MTS (Multi-channel TV Sound) or stereo.
or (VOLUME buttons)
Press to adjust the volume control.
, the battery life is shortened.
E-19
E-22
E-22
E-22
E-22, E-30
E-22
E-21
E-20
E-20
E-20
(Number buttons) E-20
E-20
E-20
E-21
E-19