Canon Digital IXUS 950 IS Advanced User's Manual page 60

Use the LCD monitor to confirm that the image was
recorded at the desired brightness.
Please note that camera shake becomes a factor at low
shutter speeds. Set IS mode to a setting other than [Off], or
shoot with the camera attached to a tripod.
Use of the flash may result in an over-exposed image. If
this occurs, shoot with the flash set to .
The following are unavailable:
- Exposure Compensation
- Metering
- AE Lock
- FE Lock
- ISO speed: Auto, High ISO Auto
- Auto ISO Shift
- Flash: Auto
- Slow Synchro
58