Canon Digital IXUS 950 IS Advanced User's Manual page 131

Cannot complete!
Could not save a part of the print, transfer or slide show settings.
Unselectable image.
You attempted to set the print settings for a non-JPEG image.
Communication error
The computer was unable to download the image due to the
large amount of images (approx. 1000) stored on the memory
card.
Lens error, restart camera
Camera detected an error while moving the lens and cut the
power automatically. This error message may appear if you press
on the lens while it is moving or turn on the camera in a dusty or
sandy environment. Turn on the camera again and shoot or
playback images. Take the camera to a service center if this
message appears frequently because there may be a problem
with the lens.
Exx
(xx: number) Camera detected an error. Turn the power off and
then back on, then shoot or play back. A problem exists if the
error code reappears. Note the number and contact your Canon
Customer Support Help Desk. If an error code displays directly
after taking a picture, the shot may not have been recorded.
Check image in playback mode.
129