Repair instructions
7.14 Dismantling the intake system
Dismantle:
•
clutch cover
•
air filter housing
•
air filter
•
air filter holder
•
handle cover
•
carburettor
1
Dismantle the vibration elements from the tank unit
as shown in figures 55 and 56.
2
Gently press out the inlet bellows A, B and the air
intake bellows C, see figure 57.
3
Loosen the nipple on the saw chain oil hose and lift
off the tank unit.
3
Unscrew the inlet bellows, see figure 59.
Cleaning and checking
Clean and check all parts carefully. Parts must
be replaced if cracked or showing signs of other
defects. Always use original spare parts.
44
– English
Fig 55
Fig 56
Fig 57
Fig 58
Fig 59