Connecting The Soundbar And Subwoofer; Using The Bluetooth Function - Teac SB21204WD User Manual

CONNECTING THE SOUNDBAR AND SUBWOOFER

1. Connect the subwoofer cable to the soundbar.
2. Please ensure that your soundbar is being mains powered and switched 'ON' for initial set up.
To do this, press the Power button on the unit or the POWER button on the remote control .
3. If you are having connectivity issues, try moving the subwoofer closer to the soundbar.

USING THE BLUETOOTH FUNCTION

Pairing a Bluetooth Device for the First Time
1. Press the POWER button on the unit or the POWER button on the remote control to switch on
the unit.
2. Select and press the MODE button repeatedly on the remote control until in Bluetooth mode
or press the Mode button repeatedly on the sound bar to enter Bluetooth mode.
3. Using the native controls on your Bluetooth device, select the "SB21204WD" in your Bluetooth
settings to pair.
4. When successfully paired and connected, a beep will issue from the unit. After initial pairing,
the unit will stay paired unless unpaired manually by the user.
5. If your device becomes unpaired or is unable to connect, repeat the above steps.