Installing The Stylistic Lt Into The Charge-Only Dock; Removing The Stylistic Lt From The Charge-Only Dock - Fujitsu Stylistic LT LT User Manual

Support Bail

Installing the Stylistic LT into the Charge-Only Dock

• Dropping conductive material onto the charging contacts
• Prior to first installing the Stylistic LT into the charge-only
1. Position the pen tablet against the positioning guide and the back of the
charge-only dock.
2. Slide the pen tablet into the tray at the bottom of the dock and press it down
firmly until it is seated, as shown in Figure 4-5. The alignment guide in the bottom
of the tray ensures that the system is properly seated over the charging pins.

Removing the Stylistic LT from the Charge-Only Dock

1. Disconnect the AC adapter from the charge-only dock or pen tablet, if required.
2. While holding the base of the dock with one hand, grasp the pen tablet at the top
and firmly pull it straight up from the base.
4-6 Using the Optional Peripherals
Figure 4-6 Charge-Only Dock Support Bail
could result in internal damage to the pen tablet circuitry.
dock, be sure to disconnect the AC adapter from the dock.
Failure to do so could result in damage to the system or
the dock.
Caution
Support
Platform
4
4