Fujitsu Stylistic LT LT User Manual page 17

Table 1-2
Connector/
Pen Tablet Icon
Peripheral
Wireless
Keyboard
Infrared Port
Headphone Jack
Mini-dock
*
Connector
USB Port
PC Cards
Modem Port
Charging
Contacts
* To avoid damaging the pen tablet or your peripheral device, shut down the system or
suspend system operation before connecting or disconnecting a peripheral device to this
port.
Peripheral Connectors and Interfaces
An infrared receiver built into the pen tablet allows
you to communicate with a wireless infrared
keyboard. The keyboard infrared port works
optimally between 10 to 30 cm (approximately 4 in.
to 12 in.) from the keyboard infrared port, located
on the bottom edge of the pen tablet. Ensure that
there is a clear line-of-sight path between the
infrared receiver on the pen tablet and the infrared
transmitter on the keyboard. Refer to Chapter 4 for
more information on the wireless keyboard.
Connects stereo headphones or powered external
speakers.
No icon Connects the Stylistic LT mini-dock or other
approved docking device. Refer to Chapter 4 for
additional information about the mini-dock.
Connects Universal Serial Bus-compliant devices
to the pen tablet.
Two Type II PC Cards or one Type III PC Card can
be installed in the PC Card slots.
No icon This port location is used to connect a telephone
line to the optional internal modem using a
standard RJ-11 telephone plug. Note that the
modem is available only in North American
systems.
No icon The charge-only contacts are used when the pen
tablet is installed in either the optional mini-dock or
charge-only dock. Refer to Chapter 4 for more
information on the mini-dock and charge-only dock.
Connectors and Peripheral Interfaces
Purpose
1-11