Fujitsu Lifebook V1020 User Manual page 106

7
The Recovery and Utility screen appears on the screen with three tabs: Diagnostics,
Recovery and Utility. Please note that Diagnostics tab is not supported on certain LifeBook/Stylistic models
when running Recovery and Utility from the hard disk. In order to restore the operating system, please insert
the "Recovery and Utility" disc in the CD/DVD drive and use the Start Recovery function under the Recovery
tab. For more information about the tabs, go to "Recovery and Utility tabs" on page 102.
Running Recovery and Utility from the disc
•
T
HE USE OF THIS DISC REQUIRES THAT YOU HAVE A DEVICE CAPABLE OF READING
SYSTEM
DEVICES
•
T
HIS DISC CAN ONLY BE USED WITH THE SYSTEM WITH WHICH IT WAS PURCHASED
BOOT Priority
Before restoring an image, you must first verify that the system is set up to boot from the optical drive. To
verify/change the boot-up priority (rather than booting-up from the hard drive or an external floppy disk
drive), perform the following steps:
1
Power on your system. When the Fujitsu logo appears on the screen. press the [Enter] key or click on the left
mouse or touchpad button; the TrustedCore Menu will appear.
2
Select the Boot Menu from the TrustedCore Menu.
3
Highlight the CD/DVD option, then click [OK].
Procedure
1
Ensure that you have a device that can read CDs either installed in your system or attached externally to it, and
that it has been set up as the Boot device.
2
Turn on the power to your system.
3
Insert the Recovery and Utility Disc into the drive tray.
4
Reboot your system. After the system reboots, the Recovery and Utility screen appears. On the screen are
three tabs: Diagnostics, Recovery, and Utility.
. Y
OU WILL NEED TO ATTACH AN EXTERNAL PLAYER
, W : .
VISIT OUR EB SITE AT US FUJITSU
101 - Restoring Your Pre-installed Software
. F
OR MORE INFORMATION ON AVAILABLE EXTERNAL
. / .
COM COMPUTERS
CD
S ATTACHED TO YOUR
.