Canon CHDK User Manual page 7

<ALT> Mode
<ALT>
When mode is enabled the function of certain buttons on the camera will change, allowing
you to start accessing CHDK features. For example, pressing the
CHDK Script menu, rather than the usual function associated with
•
There are different ways to enter
A Series – Press the Direct Print button (A momentary short press)
G Series – Press the Shortcut / Print button
S Series – Press the Shortcut / Print button
SD / IXUS Series – Press the Direct Print button
SX 200 – Press the Direct Print button
SX10 , 20, 30 – Press the Shortcut / Print button
Note:
Check the Wiki for your camera's CHDK Specialties, for instance the
on certain models e.g. A480
<ALT>
*
See note on page 6 about Shortcut button.
<ALT>
Also, while in
A Series –
Exposure/Erase
G Series –
AF Frame Selector / Erase – Toggles RAW capture mode
S Series –
FUNC.SET
SD / IXUS Series –
SX 200 – " "
SX10 , 20, 30 – AF Frame Selector / Erase – Toggles RAW capture mode
•
See notes on
Common to most cameras
• MENU – Displays the main CHDK menu
• FUNC.SET
Button -- Return to previous menu
• DISP.
• Full Shutter press – Executes the selected Script, or pauses the running script
The following functions are available any time CHDK is loaded.
Common to most cameras
• Half Shutter + Left – Toggle Zebra on /off
• Half Shutter + Right – Toggle OSD on /off
• Half Shutter + Up – Toggle Histogram on/off (on recent versions Half shoot+down).
• Half Shutter + Down – Toggle Overrides (Half Shutter + Left on a few models ? )
mode the following buttons are reassigned:
- Toggles RAW capture mode
– Toggles RAW capture mode
– Toggles RAW capture mode
DISP.
page 43 about
<ALT>
– Display the Script menu
<ALT>
mode, depending on the style of camera.
*
*
*
" " "
button.
...(Contd. P6)
button will display the
FUNC.SET
.
FUNC.SET
button for
MODE
5