Charging The Device - Verizon Airspeed User Manual

Charging the device

Your device includes a charger. To charge, plug one end of the charger into an electrical outlet
and the other end into the device's USB-C port.
WARNING!
Always use approved batteries and chargers with your Airspeed Mobile
Hotspot. The warranty does not cover damages caused by non-approved batteries and
chargers.
a) Do not disassemble, open, crush, bend, deform, puncture or shred the battery.
b) Do not modify, re-manufacture, or attempt to insert foreign objects into the battery.
Do not immerse or expose the battery to water, liquids, fire and hazardous materials.
c) Only use the battery for the device for which it is specified.
d) Only use the battery with a charging system that has been qualified with the device
per this document. Use of an unqualified battery or charger may present a risk of
fire, explosion, leakage, or other hazards.
e) Do not short circuit the battery or allow metallic conductive objects to the contact
battery terminals.
f) Replace the battery only with another battery that has been qualified with the device
per the IEEE-STD-1725 standards. Use of an unqualified battery may present a risk
of fire, explosion, leakage or other hazards.
g) Promptly dispose of used batteries in accordance with local regulations.
IMPORTANT
Whenever you remove or insert the battery, ensure your Airspeed
Mobile Hotspot is not connected to any device or power source. Never use tools,
knives, keys, pens or any type of object to force the door open or to remove the battery.
Using any of these types of objects could could risk puncturing the battery.
Airspeed Mobile Hotspot
06