Bottom Components - Fujitsu Lifebook S7110 User Manual

S7110.book Page 11 Monday, March 20, 2006 1:56 PM
Certificate of
Authenticity
(approximate
location)
Main Unit and
Configuration
Label

BOTTOM COMPONENTS

The following is a brief description of your LifeBook
notebook's bottom panel components.
Port Replicator Connector
This connector allows you to connect the optional Port
Replicator to your notebook.
Memory Upgrade Compartment
Your LifeBook notebook comes with high speed Double
Data Rate 2 (DDR2) Synchronous Dynamic RAM
(SDRAM). The memory upgrade compartment allows
you to expand the system memory capacity of your Life-
Book notebook, hence improving overall performance.
(See Memory Upgrade Module on page 45 for more infor-
mation)
Lithium ion Battery Bay
The battery bay contains the internal Lithium ion
battery. It can be opened for the removal of the battery
when stored over a long period of time or for swapping
a discharged battery with a charged Lithium ion battery.
(See Lithium ion Battery on page 40 for more information)
Main Unit and Configuration Label
The configuration label shows the model number and
other information about your LifeBook notebook. In
addition, the configuration portion of the label has the
serial number and manufacturer information that you
will need to give your support representative. It identi-
G e t t i n g t o K n o w Y o u r L i f e B o o k
Battery Release Latch
Figure 2-8. LifeBook notebook bottom panel
fies the exact version of various components of your
notebook.
Air Vents
The air vents are used to cool the system to prevent over-
heating.
Lithium ion
Battery Bay
Latch Release
Port Replicator
Connector
Air Vents
Memory Upgrade
Compartment
Air Vents
To protect your notebook from damage
and to optimize system performance, be
sure to keep all air all vents unobstructed,
clean, and clear of debris. This may
require periodic cleaning, depending upon
the environment in which the system is
used.
Do not operate the notebook in areas
where the air vents can be obstructed,
such as in tight enclosures or on soft
surfaces like a bed or cushion.
11