Rear Final Gear Oil
6. Fill the rear final gear case with the recommended oil.
4.2 US oz (125 cm
Make sure the oil level is at the lower edge of the oil fill inspection
hole (5).
7. Coat a new O-ring with grease and install it into the fill cap
groove and tighten it to the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
REAR
(5)
(4)
(1) oil drain bolt
(2) oil fill cap
(3) O-ring
148
Servicing Your Honda
3
)
(1)
(4) sealing washer
(5) oil fill inspection hole
(2)
(3)