Table of Contents
Advertisement
Initialization
INITIALIZING THE SYSTEM
Initializing the system using the Initialize switch
Initialize the system using the Initialize switch on the rear of the product.
1.
Check the power terminal on the rear of the product and disconnect the power
cable.
2.
While holding the Initialize switch, connect the power cable again.
3.
While holding the Initialize switch, wait until the "Initialize OK?" message
appears on the screen.
It takes about 8 seconds to proceed.
•
Do not press the Initialize switch while the initialization message appears.
1
4.
Press the button
"WAIT..." message on the screen.
•
To cancel Initializing the system, press
5.
When the Initializing is done, you will move to the standby screen.
J
Note that the initialization process will restore all previous settings to the factory default.
System Initialization in Master Mode
You can Initialize the system through authentication of the master card. For entering the master mode, see page
24.
F 8
1.
Press the
SETUP MENU button.
4
2.
Use the buttons
.
ENT
3.
The initialization screen appears.
1
4.
Press the button
"WAIT..." message on the screen.
•
To cancel Initializing the system, press
5.
When the Initializing is done, you will move to the standby screen.
J
Note that the initialization process will restore all previous settings to the factory
default.
20_
Initialization
to proceed with the initialization process with the
0
.
6
and
to move to the SYSTEM INIT. item and press
to proceed with the initialization process with the
0
.
INITIALIZE OK?
1:YES 0:NO
WAIT...
Sat 06 / 06 / 2009
10 : 30 : 20
1. SYSTEM INIT.
1. SYSTEM INIT.
1:YES, 0:NO
WAIT...
Advertisement
Table of Contents
