Setup - Panasonic Viera TC-P55GT30 Owner's Manual

Other function settings

Setup

Settings Items
3D settings See p.25 for more detail.
Channel surf All/Favorite/
mode Digital only/
Analog only
Language English/Español/
Français
Clock
ANT/Cable setup See p. 46-47 for more detail.
Input labels Selects the terminal and label of the external equipment.
(Display labels Devices connected to external input terminals can be labeled for easier identification during the
of connected input selection. (Input select (p. 23))
devices)
Terminals: HDMI 1-4/Component/Video/PC
Label: [BLANK] Blu-ray/CABLE/SATELLITE/DVD/DVD REC/DVR/GAME/HOME THTR/
• You can also enter the label name directly. (Entering characters (p. 21))
Anti Image Pixel orbiter
retention (Wobbling)
(Prevent Image
4:3 side bars
retention)
(4:3 mode only)
Scrolling bar
Network settings See p. 40-42 for more detail.
VIERA Link settings See p. 34-35 for more detail.
No signal for 10
ECO/energy
saving
minutes
(Stay on/ Power
TV off)
No activity for 3
hours
(Stay on/ Power
TV off)
Keyboard type
Advanced setup Auto power on
(No/Yes)
Image viewer
auto play
VIERA Connect
Banner
(On/Off)
First time setup
About
Reset to defaults
Item Description
Sets the mode to select the channel with the Channel up/down button.
Favorite: Only channels registered as FAVORITE. (p. 20)
Selects the screen menu language.
Adjusts the clock. (p. 17)
RECEIVER/COMPUTER/MEDIA CTR/MEDIA EXT/VCR/CAMERA/MONITOR/AUX/
OTHER/Not used
Enable/Disable
Off/Dark/Mid/
Bright
Press "OK" to start the horizontal "Scrolling" on the screen.
• Press any key except the POWER key to return to previous
screen.
• You will return to the previous screen if no key operation has
been performed for 15 minutes.
To conserve energy, the TV automatically turns off when NO SIGNAL and NO
OPERATION continue for more than 10 minutes.
• Not in use when "Auto power on" is set to "Yes", or "On/Off Timer" is set.
• "No signal for 10 minutes was activated" will be displayed for about 10 seconds
when the TV is turned on for the first time after the power was turned off by "No
signal for 10 minutes".
• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining
minutes prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote and
side panel key continues for more than 3 hours.
• Not in use when "Auto power on" is set to "Yes", or "On/Off Timer" is set, or while
"PC input" is selected.
• "No activity for 3 hours was activated" will be displayed for about 10 seconds when the TV
is turned on for the first time after the power was turned off by "No activity for 3 hours".
• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining
minutes prior to the shut-off.
Select keyboard type. Operate USB keyboard (p. 21)
(U.S./Canadian French/Canadian Multilingual Standard/Spanish (Latin
America)/Spanish (Spain))
Turns TV On automatically when the cable box or connected device is turned On.
TV AC cord must be plugged into this device. TV turns on every time the power is restored.
Slideshow/Photos/
Videos/Music/
Set later/Off
Sets the banner display status.
Restarts the first time setup from "Language" setting. (p. 15)
Displays TV version and software license.
Performing Reset will clear all settings made with Setup, such as channel settings.
• Password setting/entering (p. 21)
Enable: Shifts the display image automatically.
Changes the brightness of the side bar
The recommended setting is "Bright" to prevent the panel
"Image retention". (p. 58)
Sets the media contents or playback type to play back SD
cards automatically.
Set later: "Image viewer settings" menu will be displayed repeatedly.
"Using Media player" (p. 26)
[Scrolling bar]
53