Table of Contents
Advertisement
Step 4 Remove the Inner Fan Unit.
Caution: Keep the Fan Fixtures in safe place, place it back
during assembling.
Step 5 Detach 15P Cable Wire at the connector (CN5802) on
SMPS P.C.B..
Step 6 Flip the SMPS P.C.B. and position it according to dia-
gram shown.
Step 7 Position SMPS P.C.B. on the insulated material.
Step 8 Desolder 2 Wire pins, TL7 (Black), TL8 (Red) wires pin.
Step 9 Remove SMPS P.C.B..
9.20. Replacement of Regulator IC
(IC5701)
• Refer to "Disassembly of SMPS P.C.B.".
9.20.1. Disassembly
(IC5701)
Step 1 Desolder pins of the Regulator IC (IC5701) on the sol-
der side of SMPS P.C.B..
52
of
Regulator
IC
Advertisement
Table of Contents
