Flexible Bay Devices; Removing And Installing Modular Devices - Fujitsu Lifebook E8020 User Manual

E8020.book Page 19 Thursday, March 10, 2005 1:55 PM
Flexible Bay
Flexible Bay Release Latch

Flexible Bay Devices

Your Fujitsu LifeBook notebook contains a Flexible Bay.
The Flexible Bay can house an optical drive, a Lithium
ion battery, and a weight saver. (Figure 2-17)
Your Flexible Bay will have one of the following devices
installed.
Modular Multi-Format DVD Writer: This allows you
■
to access movies, software, and audio DVD/CDs and
record to DVD, CD, and DVD-RAM discs.
Modular DVD/CD-RW combo drive: This allows you
■
to access movies, software, and audio DVD/CDs as
well as to write to CDs.
Modular DVD-ROM drive: This allows you to access
■
software, data, video, or audio CDs and DVDs.
Modular Lithium ion battery: This is a rechargeable
■
battery that can be used to power your LifeBook note-
book when an adapter is not connected.
Weight Saver: This is used to fill the bay when no
■
device is needed.
REMOVING AND INSTALLING
MODULAR DEVICES
There are two ways to remove and install modular
devices in the Flexible Bay:
■ Cold-swapping: swapping devices while your LifeBook
notebook is powered off.
Hot-swapping: swapping devices while your system is
■
active using the Unplug/Eject icon from your taskbar.
You should never leave your Flexible Bay
empty when the notebook is in operation.
If left empty, dust or foreign matter may
accumulate inside the notebook.
Cold-swapping
To cold-swap modular devices in your Flexible Bay
follow these easy steps: (Figure 2-18)
1. Close any open files.
2. Shut down your LifeBook notebook.
G e t t i n g t o K n o w Y o u r L i f e B o o k
Figure 2-17 Flexible Bay
3. Pull out the Flexible Bay release latch. This will push
your device out slightly, allowing you to remove it.
4. Slide your device out until it is clear of the bay.
This will require light force.
Flexible Bay Release Latch
(a)
(c)
Figure 2-18 Removing/Installing a device in the Flexible Bay
Be careful when aligning and seating
devices in the bay. If the fit is incorrect,
you may damage the bay or the device. If
the device does not move easily in the bay,
remove it, and check for dirt or foreign
objects. It will require a firm push to latch
the device in place.
5. Slide the device you are installing into your
notebook until it clicks into place.
6. It is now safe to turn your notebook back on.
7. You can now access and use the device.
Your LifeBook notebook will automatically detect the
new device and activate it within your system. The drive
letters associated with the device will be created and
listed under My Computer and Windows Explorer.
Hot-swapping
Under Windows XP, hot-swapping is provided through
the Unplug or Eject Hardware utility.
The icon for the utility appears on the taskbar. Click on
the icon and follow the on-screen instructions.
(b)
(d)
19