User - GE HygroTrace User Manual

September 2007

User

PPB Offset
Clear PPB Offset
If you select YES, the PPB Offset is cleared and the unit returns to
the previous screen.
18
To specify an offset value in PPB
and add to the measured PPB value,
or to dry down the sensor, select
User... on the Main Menu, press
Enter and see the following screen:
Use the arrow keys to enter the user
passcode (2719), press Enter and the
following screen appears. The User
Mode indicator U appears in the
lower right corner of the screen.
To specify a PPB offset value, select
PPB Offset, press Enter and the
following screen appears:
U
Use the arrow keys to enter the PPB
offset desired, press Enter and the
screen returns to the User Settings
Menu.
U
To clear the PPB offset entered
above, select Clear PPB Offset and
press Enter. The following screen
appears. Press Cancel to return to
the Main Menu or proceed to the
U
next option.
Select YES or NO and press Enter, or
press Cancel. If you select NO or
press Cancel, the unit returns to the
previous screen and the PPD offset
is not cleared.
U
HygroTrace Moisture Transmitter