Loading A Dvd/Cd; Removing A Dvd/Cd; Using The Dvd Player Software - Fujitsu Lifebook E6150 User Manual

L i f e B o o k E S e r i e s – S e c t i o n F o u r
Uninstalling the DVD Player Software
The DVD Player software should be removed if you wish
to use a 3rd party DVD player instead of the Fujitsu
DVD Player. To un-install the DVD Player software
follow these easy steps:
1. Close any open files on the DVD/CD-ROM drive.
2. Remove any DVD/CD from the drive.
3. From the Start menu, select Settings, and then select
Control Panel.
4. Double-click the Add/Remove Programs icon.
5. Select the Fujitsu DVD Player from the Add/
Remove Programs Properties dialog box.
6. Click the Add/Remove button and the DVD/
CD-ROM software will be uninstalled.
P O I N T
If you wish to use a 3rd party DVD player software,
you must uninstall the Fujitsu DVD Player software
or the 3rd party DVD Player software may not
operate correctly.
C A U T I O N
Do not operate your DVD/CD-ROM drive unless your
LifeBook is sitting on a flat surface. Using a DVD/CD
when the drive is not level may damage the drive
or prevent proper operation.
C A U T I O N
Prolonged use of the DVD/CD-ROM drive, such as
watching a DVD movie, will substantially reduce your
battery life.

LOADING A DVD/CD

To load a DVD/CD into your DVD/CD-ROM drive,
follow these easy steps:
1. Push and release the eject button on the front of the
DVD/CD-ROM drive to open the holder tray. The
tray will come out of the LifeBook a short distance.
2. Gently pull the tray out until a DVD/CD can easily
be placed in the tray.
58
C A U T I O N
There may be a protective sheet in the tray when it was
shipped, please make sure it is removed before operating.
3. Place the DVD/CD into the tray, label side up, with
the hole in the center of the DVD/CD. Snap the DVD/
CD onto the raised circle in the center of the tray.
4. Gently push the holder tray back in until you
hear a click. (Figure 4-7)
P O I N T
If you have disabled the Auto Insert function, you will
have to start the DVD/CD from your desktop, as your
LifeBook will not automatically recognize that
a DVD/CD has been loaded.
(a)
(c)
Figure 4-7 Loading/Ejecting a DVD/CD

REMOVING A DVD/CD

1. Push and release the eject button on the front of
the DVD/CD-ROM drive. This will stop the
DVD/CD and the holder tray will come out
of the LifeBook a short distance.
2. Gently pull the tray out until the DVD/CD can easily
be removed from the tray.
3. Carefully remove the DVD/CD from the holder tray.
4. Gently push the holder tray back in until you
hear a click.
(b)
(d)