Starting Your Lifebook; Power On; Boot Sequence; Bios Setup Utility - Fujitsu Lifebook E6150 User Manual

Starting Your LifeBook

POWER ON

Power and Suspend/Resume Button
The Power and Suspend/Resume button is used to power
on your LifeBook, to resume from Standby or
Save-to-Disk mode, to place your LifeBook in Standby or
Save-to-Disk mode or to power off. You can also turn off
your LifeBook by choosing Shut Down from the
Windows 98 Second Edition or Windows 2000
Professional Start menu.
Once you have connected your AC adapter or charged
the internal Lithium ion Battery, you can press this
button to Power On your LifeBook. (See Figure 2-3 on
page 10 for location)
C A U T I O N
When you turn on your LifeBook be sure you have a
power source. This means that at least one battery is
installed and charged, or that the AC or Auto/Airline
adapter is connected and has power.
C A U T I O N
Do not carry your LifeBook around with the power on
or subject it to shocks or vibration, as you risk damaging
your LifeBook.
When you Power On your LifeBook, it will perform a
Power On Self Test (POST) to check the internal parts and
configuration for correct functionality. If a fault is found,
your LifeBook will emit an audio warning and/or an error
message will be displayed. (See Power On Self Test
Messages on page 81 for more information) Depending on
the nature of the problem, you may be able to continue by
starting the operating system or by entering the BIOS
setup utility and revising the settings.
After satisfactory completion of the Power On Self Test
(POST), your LifeBook will load your operating system.
G e t t i n g S t a r t e d
C A U T I O N
Never turn off your LifeBook during the Power On
Self Test (POST) or it will cause an error message to
be displayed when you turn your LifeBook on the next
(See Power On Self Test Messages on page 81 for
time.
more information)

BOOT SEQUENCE

The procedure for starting-up your Fujitsu LifeBook is
termed the Bootup sequence and involves your Life-
Book's BIOS. When your LifeBook is first turned on, the
main system memory is empty, and it needs to find
instructions to start up your LifeBook. This information
is in the BIOS program. Each time you power up or
restart your LifeBook, it goes through a boot sequence
which displays a Fujitsu logo until your operating system
is loaded. During booting, your LifeBook is performing
a standard boot sequence including a Power On Self Test
(POST). When the boot sequence is completed without
a failure and without a request for the BIOS Setup
Utility, the system displays the operating system's
opening screen.
The boot sequence is executed when:
You turn on the power to your LifeBook.
You restart your LifeBook from the Windows
Shut Down dialog box.
The software initiates a system restart. Example:
When you install a new application.
You reset the system by pressing the three keys
[CTRL+ALT+DEL].

BIOS SETUP UTILITY

The BIOS Setup Utility is a program that sets up the
operating environment for your LifeBook. Your BIOS
is set at the factory for normal operating conditions,
therefore there is no need to set or change the BIOS'
environment to operate your LifeBook.
The BIOS Setup Utility configures:
Device control feature parameters, such as changing
I/O addresses and boot devices.
System Data Security feature parameters, such
as passwords.
41