Operating Instructions - Utilitech DQ1709 Manual

OPERATING INSTRUCTIONS

1. Carefully remove the heater from the carton and bag. Make certain the unit is in the OFF
position before plugging the heater into the power outlet.
2. Before using the heater, make sure that it is on a flat and stable surface. Damage may occur if it
is placed in an incline or decline.
3. Turn the power control to the off position and then plug the heater power cord directly into a
standard AC outlet. The outlet may need to be replaced if the plugs fit loosely when inserted into
the outlet.
4. When the heater is not in use, turn all the controls to OFF（O）, and remove plug from the
socket-outlet.
B
A
C C
3
D
A. Power Light
B. Thermostat Control
C. Selector
D. Carry Handle