Ergotrac Pointing Device; Clicking - Fujitsu LifeBook C-4235 User Manual

L i f e B o o k C S e r i e s – S e c t i o n T w o
Cursor

ErgoTrac Pointing Device

The ErgoTrac pointing device is built into your Fujitsu
LifeBook. It is used to control the movement of the
cursor to select items on your display panel. The
ErgoTrac is composed of a cursor control and a left and
right button. The cursor control works the same way a
mouse does, and moves the cursor around the display.
The left and right buttons function the same as mouse
buttons. The actual functionality of the buttons may
vary depending on the application that is being used.
(Figure 2-11)
P O I N T
An external mouse can be connected to either
the USB or PS/2 port on your notebook, and used
simultaneously with the ErgoTrac. However, if you
boot the system with an external mouse connected
the ErgoTrac will be disabled or enabled depending
on the specifications in your BIOS settings.
Setup Utility on page 35 for more information)
22
Figure 2-11 ErgoTrac™ pointing device
If the Infrared Mouse is enabled, your PS/2 external
device will be disabled.
page 35 for more information)

CLICKING

Clicking means pushing and releasing a button. To
left-click, move the cursor to the item you wish to select,
press the left button once, and then immediately release
it. To right-click, move the mouse cursor to the item you
wish to select, press the right button once, and then
immediately release it. (Figure 2-12)
(See BIOS
Left Button
Cursor Control
P O I N T
(See BIOS Setup Utility on
Figure 2-12 Clicking
Right Button