Connections For A Standard-Defi Nition Tv (Sdtv) - Cisco ISB7105W Installation Manual

Connections for a Standard-Defi nition TV (SDTV)

When using the receiver with an SDTV, you must make one of the following connections
to view content. Some SDTVs may not have all these connections. Refer to the
owner's manual for your TV and the cabling diagrams in this manual for more detailed
information.
Although all connections provide you with quality service, we list the connections in our
recommended order.
Notes:
• The labeling on your receiver or SDTV may vary slightly from the illustrations shown
below.
• Some cables shown in the connection diagrams may not be included with this receiver.
Use One of These Required
Connections to an SDTV
The YPbPr (red, blue, and green)
connectors can provide standard-defi nition
component video signals to an SDTV. A
separate audio connection is also needed.
See the connection diagram on page 19
for an example.
The Video Out connector provides a video
connection to an SDTV. A separate audio
connection is also needed.
See the connection diagram on page 20
for an example.
14
Receiver
Connections
Pb Y
Pr
L R
AUDIO
OUT
VIDEO
OUT
L R
AUDIO
OUT
SDTV
Connections
Y
Pb
Pr
L R
VIDEO
IN
L R