Port Replicator; Port Replicator Components; Attaching Port Replicator; Detaching Port Replicator - Fujitsu Lifebook B6110D User Manual

L i f e B o o k B S e r i e s – S e c t i o n F o u r
Port Replicator Release Latch

Port Replicator*

Ideal for quick connect/disconnect of peripheral devices,
the optional Port Replicator extends the functionality of
your LifeBook notebook by providing ports to connect a
LAN (RJ-45) cable, an external monitor, two USB 2.0
devices, and DC power.
The Port Replicator connects to the bottom of your
notebook. See "Device Ports" on page 48.

PORT REPLICATOR COMPONENTS

Following is a description of the Port Replicator components.
(Figure 4-13)
DC Power Jack
The DC power jack allows you to plug in the AC adapter
to power your notebook and charge the internal Lithium
ion battery. The DC power jack is located on the end of
the port replicator.
USB 2.0 Ports (Qty. 2)
Universal Serial Bus (USB) 2.0 ports allow you to
connect USB devices. USB 2.0 ports are backward-
compatible with USB 1.1 devices.
External Monitor Port
The external monitor port allows you to connect an
external VGA or SVGA monitor. Note that if a Port
Replicator is attached, you must use the external
monitor port on the Port Replicator, not the one on
your system.
LAN (RJ-45) Jack
The LAN jack allows you to connect a LAN to the Port
Replicator. Note that when the system is attached to the
Port Replicator, the LAN Jack on the Port Replicator
should be used, not the one on the system.
* Optional device
46
Docking Port
External Monitor Port
USB Ports
Figure 4-13. Optional Port Replicator rear panel
Docking Port
The docking port connects the Port Replicator to your
LifeBook notebook.
Port Replicator Release Latch
Pull the Port Replicator Release latch away from the Port
Replicator to remove it from your notebook.

ATTACHING PORT REPLICATOR

To attach the Port Replicator, align the Port Replicator
connector on the bottom of your notebook with the
connector on the Port Replicator and push the corners
down simultaneously. (Figure 4-14)

DETACHING PORT REPLICATOR

To detach the Port Replicator:
1. Pull the Port Replicator's release latch away from the
LAN (RJ-45) Jack
Figure 4-14. Attaching the Port Replicator
Port Replicator to release it from your notebook.
(Figure 4-15)
DC Power Jack