To remove the SIM card, power off your phone
3
and take out the battery. Then press the SIM
card with one finger and slide it out of the slot.
Loading/Removing a Memory Card
The U1215 phone supports a memory card (micro-
SD) with a capacity up to 1 GB.
Remove the rubber cap from the memory card
1
slot; then insert the memory card into the slot, as
shown in the following figure.
Loading/Removing a Memory Card
After inserting the memory card completely,
2
replace the rubber cap.
To remove a memory card, open the rubber cap
3
and press the memory card gently. Now the
memory card will pop up automatically. Then
take it out as shown in the following figure.
Powering On/Off
Powering On
Ensure that the SIM card is in your phone and that
the battery has been charged.
2
9