Top Panel Leds And Buttons - NETGEAR Nighthawk RAX29 User Manual

Top panel LEDs and buttons

The status LEDs and two buttons are located on the top panel of the router.
Figure 2. Top view
Table 1. LED descriptions
LED and Button
Power LED
Internet LED
2.4 GHz WiFi LED
Hardware Setup
Nighthawk AX2400 WiFi 6 Router
Description
• Solid amber: The router is starting, or the router's thermal cutoff is triggered.
• Solid white: The router is ready.
• Blinking amber: The router is not ready, firmware is upgrading, or the Reset
button was pressed.
• Off: Power is not supplied to the router.
• Solid white: The Internet connection is ready.
• Solid amber: The router detected an Ethernet cable connection to the
modem.
• Blinking white: The port is sending or receiving traffic.
• Off: No Ethernet cable is connected between the router and the modem.
Solid white: The 2.4 GHz WiFi radio is operating.
Blinking white: The router is sending or receiving WiFi traffic.
Off: The 2.4 GHz WiFi radio is off.
10 User Manual