Canon PowerShot A310 User Manual page 52

Playback – The Basics
When a movie has finished playing, it will
display the last frame. If the SET button is
pressed in this state, the camera will revert to
the movie playback panel. If the SET button
is pressed again, the movie will start playing
from the first frame.
Pausing and Resuming Play
Press the SET button to pause the movie.
Press it again to resume.
Fast Forwarding/Rewinding
Select one of the following operations using
or and press the SET button.
(Exit): Return to single image
playback
(First Frame): Display the first frame
(Previous Frame): Return to the previous
frame (Rewinds if the SET
button is held down)
(Next Frame): Proceed to the next frame
(Fast forwards if the SET
button is held down)
(Last Frame): Display the last frame
50
You may experience frame dropping and
audio breakup when playing back a movie
on a computer with insufficient system
resources.
The volume at which movies play back
can also be adjusted in the Set up menu
(p. 59).
If you set [Mute] to [On] in the Set up
menu (p. 58), no sound is reproduced.
However, you can resume the sound
and adjust the volume during movie
playback using or .
Editing Movies
You can delete unwanted portions from the first or
second half of the movie clip.
1
Select the movie you wish to edit,
and press the SET button.
See Viewing Movies (p. 49).