Canon PowerShot A310 User Manual page 31

Shooting Mode
Exposure Compensation
White Balance
ISO Speed
Photo Effect
Resolution (Movie)
Flash
Light Metering Mode
Macro/Infinity
In addition to the above, the histogram and recorded
movie time are displayed.
The following information may be displayed,
depending on the image.
An audio file other than a wave file, or a file
with unrecognized format is attached.
A JPEG file not supported by "Design Rule
for Camera File System" standards.
RAW file format
Unrecognizable file formats
The image in the LCD monitor may
p. 35
darken when the monitor is used under
p. 65 sunlight or other strong lighting. This is
not a defect.
p. 66
p. 69
The on/off setting of the LCD monitor
display mode is memorized when the
p. 70
camera is turned off. When the camera is
p. 36
turned on again it assumes the last
mode. However, when the LCD monitor
p. 38
is turned on and the "Change the
p. 65
batteries" message appears, the LCD
p. 40
monitor may not automatically turn on
the next time the camera is started.
Setting the shooting mode to
turns the LCD monitor on regardless
of whether it is set to on or off.
A slow shutter speed has likely been
selected because of insufficient lighting if
the upper indicator beside the viewfinder
blinks orange after the metering
preparations are complete and the
camera shake icon displays in the
LCD monitor. Set the flash to
or affix the camera to a tripod to shoot.
Basic Functions
, or
or ,
29