Inserting The Sim Card; Removing A Sim Card - Fujitsu Siemens Computers CELSIUS H250 Easy Manual

Inserting the SIM card

► Switch the notebook off and pull the power plug out of the mains socket.
► Close the LCD screen so that it noticeably locks into place.
► Disconnect all cables connected to the notebook.
► Turn your notebook over and place it on a stable, sturdy, flat surface. If necessary, lay a
non-slip cloth on this surface to prevent the notebook from being scratched.
► Remove the battery (see Section
a
2
► Reinstall the battery (see
► Turn the notebook the right way up and place it on a flat surface.
► Reconnect the cables that you disconnected previously.

Removing a SIM card

► Switch the notebook off and pull the power plug out of the mains socket.
► Close the LCD screen so that it locks into place.
► Disconnect all cables connected to the notebook.
► Turn your notebook over and place it on a stable, flat and clean surface. If necessary, lay
an anti-slip cloth on this surface to prevent the notebook from being scratched.
► Remove the battery (see Section
a
1
► Reinstall the battery (see
► Turn the notebook the right way up and place it on a flat surface.
► Reconnect the cables that you disconnected previously.
A26391-K226-Z120-1-7619, edition 2
"Removing the battery", Page
1
"Installing battery", Page
"Removing the battery", Page
2
"Installing battery", Page
Ports and operating elements
16).
► Slide the SIM card into the slot (1) (with the
contacts facing upwards) until it engages.
► Slide the clip (a) of the SIM card in the
direction of the arrow (2).
16).
16).
► Slide the clip (a) of the SIM card in the
direction of the arrow (1).
► Press on the edge of the SIM card so that
it jumps up slightly out of the slot.
► Pull the SIM card out of the slot in the
direction of the arrow (2).
16).
19