Fujitsu Siemens Computers AMILO Pro V8010 Operating Manual page 51

► Connect the power adapter cable to the DC jack (DC IN) of the Port Replicator (1).
► Connect the power cable to the power adapter (2).
► Plug the power cable into the mains outlet (3).
If the notebook is connected to a Port Replicator, the operating system creates an
i
hardware profile for the "Docked" mode. In this profile, for example, the setting is saved as
to which monitor was last used for output. This profile will be loaded, as soon as the
notebook is connected to any desired Port Replicator.
A26391-K168-Z120-1-7619, edition 2
3
Using your notebook
1
2
41