Optical Drive; Cd/Dvd Indicator - Fujitsu Siemens Computers AMILO Pro V8010 Operating Manual

Professional notebook
Hide thumbs Also See for AMILO Pro V8010:
Table of Contents

Advertisement

Using your notebook

Optical drive

Depending on the variant, your notebook is equipped with a combo drive (CD-RW/DVD) or a Multi-
format DVD burner with double layer support.
This drive contains a light-emitting diode, classified according to IEC 825-1:1993: LASER
!
CLASS 1 (LUOKAN 1 LASERLAITE, KLASS 1 LASER APPARAT). Therefore, do not
remove any drive housing parts.
Handling CD/DVDs
Observe the following guidelines when handling CD/DVDs:
Avoid touching the surface of a CD/DVD. Hold CDs/DVDs by their edges!
Always store CDs/DVDs in their cases. This will protect CD/DVD from dust,
scratches and other damage.
Protect your CDs/DVDs from dust, mechanical vibration and direct sunlight!
Avoid storing a CD/DVD in areas subject to high temperatures or humidity.
You may use both 8-cm and 12-cm CDs/DVDs in the combo drive.
When using CDs/DVDs of poor quality vibrations and reading errors may occur.

CD/DVD indicator

The CD/DVD indicator
is ready for reading. The indicator lights up when the drive is being accessed. You may only remove
the CD/DVD when the indicator is dark.
If the CD/DVD indicator
i
continues to flash, the drive cannot access the data carrier.
Either the CD/DVD is damaged or dirty or you are using a data carrier that the drive cannot
read.
28
flashes when a CD/DVD is inserted. The indicator goes out when the drive
does not go out after inserting a CD/DVD, but instead
A26391-K168-Z120-1-7619, edition 2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents