Radio Components: Wireless Lan/ Bluetooth/Umts; Switching The Radio Components On And Off - Fujitsu Siemens Computers AMILO Pro V2030 Easy Manual

Ports and operating elements

Radio components: Wireless LAN/ Bluetooth/UMTS

UMTS Bluetooth Wireless LAN
The installation of a wireless LAN module not approved by Fujitsu Siemens Comput-
ers GmbH voids the permits issued for this device (see chapter
Depending on the device variant, wireless LAN, Bluetooth and/or UMTS may be integrated in your
notebook. On delivery, WLAN components are switched on, Bluetooth components off.

Switching the radio components on and off

► Press the Easy Launch key for the radio components, to switch the radio components on or off.
UMTS UMTS Bluetooth Bluetooth Wireless LAN Wireless LAN
or
► Press the Fn
The radio component indicator lights up when one or more radio components are switched on.
If you switch the radio components off, the Bluetooth module and the UMTS and
wireless LAN transmission unit (antenna) are also switched off.
You can turn the radio components on or off either individually or together.
In the BIOS Setup you can specify which radio components can be switched on
and off with the corresponding Easy Launch key or with the
combination. Only components activated in the BIOS Setup can be switched on
and off with the
key. Radio components disabled in the BIOS-Setup, on the other hand, cannot be
controlled with the Easy Launch key or the key combination.
You can enable or disable radio components individually in the BIOS Setup.
To do this you must have set at least a supervisor password.
Observe the additional security instructions for devices with radio com-
ponents provided in the "Security" manual.
Further information on using the wireless LAN is provided in the online help for your
wireless LAN software and in the "Wireless LAN" manual. The "Wireless LAN" manual
can be found on the "Drivers & Utilities" CD/DVD provided with your computer.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth software.
You can obtain more information on UMTS from your service provider.
16
+ F10 key combination to switch the radio components on or off.
Fn + F10 combination or with the corresponding Easy Launch
"Technical data", Page
Fn + F10
A26391-K195-Z120-1-7619, edition 1
19).
key