Removing The Hard Disk; Installing The Hard Disk - Fujitsu Siemens Computers AMILO Pro V2030 Easy Manual

Removing and installing components during servicing

Removing the hard disk

► Switch your notebook off.
Hard disk
► Close the LCD screen.
► Unplug the mains plug of the mains adapter from the mains socket.
► Disconnect all cables connected to the notebook.
► Turn your notebook over and place it on a stable, sturdy, flat surface. If necessary, lay an
anti-slip cloth on this surface to prevent the notebook from being scratched.
► Remove the battery (see
1

Installing the hard disk

3
► Install the battery again (see
► Turn the notebook the right way up and place it on a flat surface.
► Reconnect the cables that you disconnected previously.
18
"Removing the battery", Page
2
1
3
2
3
1
"Battery: inserting", Page
12).
► Remove the screws (1).
► Lift off the cover (2).
► Pull the hard disk out of the bay in the
direction of the arrow (3).
► Push the hard disk into the hard disk
bay (1) in a straight line.
► Position the cover (2).
► Secure the cover with the screws (3).
12).
A26391-K195-Z120-1-7619, edition 1