Settings in BIOS Setup
Operating BIOS setup
To open one of the six BIOS menus from the start window, mark the corresponding entry with the
cursor keys æ or è and press the entry key Ú.
Ê
Mark the menu parameters with the cursor keys æ or è.
Ê
Use the cursor keys å or ç to change the setting of the marked value.
Ê
Use the [Esc] key to return to the start window.
Editable parameters are located in square brackets.
i
Additional instructions on navigation within special menus are contained in the footer of
the corresponding menu.
Load Default Settings
When this menu is selected, the following dialogue box appears:
Ê
If the default settings are to be restored for all BIOS parameters, then mark Yes and press the
Enter key Ú.
Ê
Otherwise mark No and press the Enter key Ú.
Exiting BIOS-Setup
Ê
Press the {Esc} key to return from the submenu to its superior menu.
The main window BIOS Utility appears.
Ê
Press [Esc] again.
If nothing has been changed in the BIOS, then the following dialogue box appears:
Do you really want to exit SETUP?
[Yes]
46
Ê
BIOS Setup is terminated and the device is
[No]
rebooted.
Mark Yes and press the Enter key Ú to exit
the BIOS Setup.
440 N00072