Table of Contents
Advertisement
Chapter 5
5. 5.
Backup and Restore Configuration Settings
The configuration settings are stored as a configuration file in the extender. You can
backup the configuration file and restore the extender to the previous settings from
the backup file when needed. Moreover, if necessary, you can erase the current settings
and reset the extender to the default factory settings.
1. Visit http://tplinkrepeater.net, and log in with the username and password you set for
the extender.
2. Go to
Settings
>
System Tools
¾ To backup configuration settings:
Click
Backup
to save a copy of the current settings to your local computer. A ' . bin' file of
the current settings will be stored on your computer.
¾ To restore configuration settings:
1. Click
Browse
to locate the backup configuration file stored on your computer, and
click Restore.
2. Wait a few minutes for the restore and reboot.
Note: During the restore process, do not power off or reset the extender.
¾ To reset the extender to factory default settings:
1. Click
Factory Restore
2. Wait a few minutes for the reset and reboot.
>
Backup &
to reset the extender.
Restore.
Manage Your Extender
29
Advertisement
Table of Contents
