Power On - Fujitsu 420D User Manual

S e c t i o n T w o
Save-to-Disk Mode Activation
Pressing the Save-to-Disk Mode button will
cause all of RAM to be stored in the Save-to-
Disk space on the hard drive and the notebook
to shutdown. Shutdown turns o all notebook
power. If the Power Switch is not turned o the
notebook can be restarted by pressing the
Suspend/Resume Button which will cause the
RAM to reloaded,letting you begin where you
left o . (See Figure 1-5 on page 5 and text on
pages 4, 37–39 and 70–71.)
Video Standby Mode Activation
Pressing the Video Standby Mode button
toggles the enable/disable feature for the display
time-out. When disabled only the Suspend
Mode or the Standby Mode will turn o the
display, the video time-out setting will be
ignored. (See pages 41 and 70–71.)
22
PC Card Control
Pressing the PC Card Control button accesses a
dialog box which allows you to view the proper-
ties of the PC Card installed in each slot and
enable or disable each card.

Power On

Facing the Keyboard and Built-in Display, move
the Power Switch towards the rear of your note-
book. This is the On position. (See Figure 2-5.)
When you are done working you can leave your
notebook in Suspend Mode, (see pages 39 and
71), or you can turn it o . The Power Switch
moved toward the front of your notebook is in
the O position. See the section Power O ,
(page 23), for recommended shuto procedures.
C A U T I O N
After turning your notebook off, make
sure that it has been off at least 10 sec-
onds before turning the Power Switch
to On. If you do not, it could cause a
system error.
When you turn on your notebook be sure you
have a power source. This means that the bat-
tery is installed and charged, or that the AC
Adapter or the Auto Adapter is connected
and has power.
C A U T I O N
When the power is On, do not carry
your notebook around, or subject it to
shocks or vibration, as you risk damaging
your notebook.
C A U T I O N
The Nickel Metal Hydride Battery Pack
is not charged when you purchase your
notebook. Initially you will need to
connect the AC Adapter to use it.