Locating connectors and controls on the wireless display adapter
The following illustrations help you locate the connectors and controls on the wireless display adapter.
Figure 1. Overview of the wireless display adapter
1
Power indicator
3
Mode / WPS button
5
Micro USB 2.0 connector
7
Headset connector
9
VGA-in connector
11
Emergency reset hole
1
Power indicator
The power indicator is used to indicate the power status of the wireless display adapter. It will be lit in red in
five seconds after the wireless display adapter is supplied with power.
2
Security-lock slot
The security-lock slot is used to secure the wireless display adapter with a security cable lock.
Note: The security cable lock is not included in your option package. If necessary, purchase a security
cable lock.
3
Mode / WPS button
The Mode / WPS button is used to establish the wireless connection, change the wireless display adapter
settings and update firmware. For more information, refer to "Configuring the wireless display adapter"
on page 11.
4
Power switch
The power switch is used to turn on or turn off the wireless display adapter.
5
Micro USB 2.0 connector
The micro USB 2.0 connector is used to attach the ac power adapter for power supply to the wireless
display adapter.
2
ThinkPad Enterprise Wireless Display Adapter User Guide
2
Security-lock slot
4
Power switch
6
HDMI connector
8
VGA-out connector
10
Hang slot
12
Machine type and model label