Viewing Images On Your Pc - FujiFilm Finepix S5100 Quick Start

Viewing images on your PC

A. Install Software
Do not connect the camera to your PC until the software
installation is completed.
1. Turn on your PC and start up Windows.
●
!
Users of Windows 2000 Professional or Windows XP should log in
by using a system administrator account (e.g. "Administrator").
2. Quit all other active applications until no applications are
shown in the taskbar.
3. Load the enclosed CD-ROM into the CD-ROM drive. The
installer starts up automatically.
4. The Setup screen appears.
Click the [Installing FinePixViewer] button.
5. After installation completed, press [Restart] button.
B. Connect the Camera to your PC
1. Insert an xD-Picture Card into the camera.
2. Set the "USB MODE" setting in the "SET-UP" menu to
¶
digital camera " ". (Refer to "USING THE SET-UP
SCREEN" in the owner's manual.)
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
1 2 3 4
ＡＦ ＩＬＬＭＩＮＡＴＯＲ ：ＯＮ ＡＦ ＩＬＬＭＩＮＡＴＯＲ ：ＯＮ
ＺＯＯＭ ＰＯＳＩＴＩＯＮ ：ＲＥＳＥＴ ＺＯＯＭ ＰＯＳＩＴＩＯＮ ：ＲＥＳＥＴ
ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ
ＣＣＤ−ＲＡＷ ：ＯＦＦ ＣＣＤ−ＲＡＷ ：ＯＦＦ
ＯＫ ＯＫ ＳＥＴ ＳＥＴ BACK BACK ＣＡＮＣＥＬ ＣＡＮＣＥＬ
3. Turn your camera off.
4. If you have one, plug the AC power adapter connector
into the "DC IN 5V" socket on the camera and then plug
the adapter into the power outlet, otherwise be sure your
battery is fresh and charged.
included USB cable (mini-B)
5. Use the
camera to your PC.
Camera
USB socket
(mini-B)
DC IN 5V
USB socket
socket
6. Turn the camera on.
Windows 98/98 SE/Me/2000 Professional
7.
FinePixViewer starts up automatically.
A.Install Software
A.Install Software
B.Connect a Camera to PC
B.Connect a Camera to PC
C.Save Images
C.Save Images
to connect the
PC
Windows XP
q The "Found New Hardware" help message appears in
the bottom-right corner of your screen. This message
will close when the settings are completed. No action
is required.
w Specify the settings in the "AutoPlay" dialog box.
e Select "Viewing images using FinePixViewer" and
then select the "Always do the selected action"
checkbox.
r Click the [OK] button to launch FinePixViewer.
C. Save Images
1. The Save image Wizard starts up. Click the [NEXT]
button.
2. Check that the files are downloaded from the camera to
your PC and that a folder with the date is created.
Ex. \My Documents \ My Pictures \ 2004_0312 Image
D. View Images
1. Click the [Show List of Images]
button.
2. Select "Preview" in the View menu to display an enlarged
image.
For more information
Refer to "How to use FinePixViewer" in the HELP menu, or chapter 5
and 6 in the Owner's Manual, or visit Fujifilm "Q&A Search" in the
following website.
( http://home.fujifilm.com/products/digital/ )
For Macintosh users, refer to chapter 5 and 6 in the Owner's Manual.