Viewing Images On Your Pc - FujiFilm Finepix S8100fd Basic Manual

Hide thumbs Also See for Finepix S8100fd:
Table of Contents

Advertisement

L310GB.book Page 32 Thursday, January 17, 2008 9:44 PM

Viewing Images on your PC

Install the supplied software "FinePixViewer" on your PC to view images on it. With "FinePixViewer", you can transfer images
from your camera to your PC, manage image files and folders, and order online printing (only for Windows users) etc.
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
OS
CPU
RAM
Hard disk space
Display
External connection terminal
MEMO
• When you install the software, login using a system administrator account (e.g. "Administrator")
• Internet connection is required to use the FinePix Internet Service. However, the software can still be installed even if you do not
have an Internet connection.
CAUTION
• Operation is not guaranteed on models with an additional USB interface board.
• Windows 95, Windows 98, and Windows NT are not supported.
• Operation is not guaranteed on home-built PCs or on PCs running updated operating system software.
• Connect the camera directly to the Macintosh using the USB cable (included). The software may not operate correctly if you use
an extension cable or connect the camera via a USB hub.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
32
Windows
Requirement
Windows 98 SE or later
Windows XP or later
Pentium 200MHz minimum
2GHz Pentium 4 or better
128MB minimum
512MB or better
1GB minimum
2GB or better
800 x 600 pixels or better, 16-bit
1024 x 768 pixels or better,
color or better
Highest (32bit)
Pre-installed USB port
Recommendation
Mac OS X or later
Power PC, Intel Processor
loaded
256MB minimum
600MB minimum
800 x 600 pixels or better,
approx. 32,000 colors or better
Macintosh
Requirement

Advertisement

Table of Contents
loading

Table of Contents