Product Information - Acer Veriton FP2 Service Manual

Product Information

The screen below appears if you select Product Information from the main menu:
Product Name ................... Acer Veriton FP2
System S/N ..................... 0000000000000000
Main Board ID .................. S511P
Main Board S/N ................. N/A
System BIOS Version ............ V4.0
SMBIOS Version ................. 2.3
*System BIOS ID.................. R01-A0 EN
*BIOS Release Date............... Jan 03,'00
NOTE: The asterisk (*) mark indicates that the parameter appears only when you are in the Advanced Level.
The Product Information menu contains general data about the system, such as the product name, serial
number, BIOS version, etc. These information is necessary for troubleshooting (maybe required when asking
for technical support).
The following table describes the parameters found in this menu:
Parameter
Product Name
System S/N
Main Board ID
Main Board S/N
System BIOS Version
SMBIOS version
System BIOS ID
BIOS Release Date
Chapter 2
Product Information
Displays the model name of your system.
Displays your system's serial number.
Displays the main board's identification number.
Displays your main board's serial number.
Specifies the version of your BIOS utility.
The System Management Interface (SM) BIOS allows you to check your
system hardware components without actually opening your system.
Hardware checking is done via software during start up. This parameter
specifies the version of the SMBIOS utility installed in your system.
Specifies the version of the BIOS.
Displays the release date of the BIOS.
Description
25