Connecting The Electronics - Philips AVENT L6C2S3 Manual

Connecting the Electronics

Parts you will need for this step:
Assembled
pump body
(see pages 9-10)
Control
cable
Transparent tubing
Wall plug cord
First (Control) Pump
First (Control) Pump
Control cable
socket
Transparent
tubing port
11 Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT
Double Pumping?
Double pumping
connector
Control handle
Pump motor
Electric
adaptor
See section titled, 'Twin Electronic Breast Pump
Parts Guide' on page 1 for a description of First
(Control) Pump and Second Pump.
Push the control handle onto the
1
assembled pump body so that it sits
firmly on top of the silicone diaphragm.
This assembly becomes the First (Control)
Pump which contains the electronics
of the pump.
2
Click the control cable into the socket
on the control handle.
Then securely attach one of the
transparent tubes to the port on
the control handle.
Double pumping? Complete the next step
with your second assembled pump body.
See section titled, 'Twin Electronic Breast Pump Parts
Guide' on page 1 for a description of First (Control)
Pump and Second Pump
Push the double pumping connector onto the pump
3a
body so that it sits firmly on top of the silicone
diaphragm. Securely attach the other transparent tube
to the double pumping connector.When the breast
pump is fully assembled, the Second Pump will mimic
simultaneously the speed and suction of the First
(Control) Pump.
Single pumping? Complete the next step
with the remaining tube.
If you are single pumping, you can keep
3b
the transparent tube out of the way by
attaching it to the white clip.
Securely attach the twin tubing
4
to the ports on the pump motor.
Connect the control cable
into the adjacent socket.
5
Connect the electric adaptor to power socket
on the pump motor.
Then connect the wall plug cord to the electric
adaptor and insert the plug into the wall outlet.
Connecting the Electronics
Second Pump
Twin tubing
port
Control cable
socket
12