Connection Settings - Nokia RM-482 User Manual

two phone lines. Select which phone line you want to use
for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line. If
you select Line 2 and have not subscribed to this network
service, you are not able to make calls. When line 2 is
selected, is displayed in the home screen.
Line change — Prevent line selection (network service),
•
if supported by your SIM card. To change this setting, you
need the PIN2 code.
Network settings
Select Menu Ctrl. panel Settings and
> >
Network.
To select the network mode, select Network mode
mode, UMTS, or GSM. In dual mode, the device switches
automatically between networks.
Tip: Selecting UMTS enables faster data transfer, but
may increase the demand on battery power and reduce
the battery life. In regions close to both GSM and UMTS
networks, selecting Dual mode may cause constant
jumping between the two networks, which also
increases the demand on battery power.
To select the operator, select Operator selection
Manual to select from available networks, or
set the device to select the network automatically.
To set the device to indicate when it is used in a microcellular
network (MCN), select Cell info display > On.
Cyan Cyan

Connection settings

Select Menu Ctrl. panel
>
Select from the following:
Bluetooth — Edit the Bluetooth settings.
•
USB — Edit the data cable settings.
•
Destinations — Set up new or edit existing access points.
•
Some or all access points may be preset for your device by
your service provider, and you may not be able to create,
edit, or remove them.
VPN — Manage the settings for virtual private
•
networking.
Phone
>
Packet data — Define when packet data network is
•
attached, and enter the default packet switched access
and Dual
point name if you use your device as a modem for a
computer.
Wireless LAN — Set the device to display an indicator
•
when a wireless LAN (WLAN) is available, and define how
often the device searches for networks.
Video sharing — Enable video sharing, select the SIP
•
profile for video sharing, and define the video saving
settings.
SIP settings — View or create session initiation protocol
•
(SIP) profiles.
and
XDM settings — Create an XDM profile. The XDM profile is
•
Automatic to
required for many communications applications, for
example, presence.
Presence — Edit the settings for presence (network
•
service). To register for the service, contact your service
provider.
Remote drives — Connect the device to a remote drive.
•
Configurations — View and delete trusted servers from
•
which your device may receive configuration settings.
Magenta Magenta Yellow Yellow Black Black
Settings and Connection.
>