Table of Contents
Advertisement
Use the WLAN wizard in the home screen
In the home screen, the WLAN wizard shows the status of
your WLAN connections and network searches. To view the
available options, select the row showing the status.
Depending on the status, you can start the web browser using
a WLAN connection, connect to your net call service,
disconnect from a WLAN, search for WLANs, or set the
network scanning on or off.
If WLAN scanning is turned off, and you are not connected to
any WLAN,
WLAN scanning off
is displayed in the home
screen. To turn WLAN scanning on and search for available
WLANs, select the row showing the status.
To start a search for available WLANs, select the row showing
the status and
Search for
WLAN.
To turn WLAN scanning off, select the row showing the status
and
Switch WLAN scan
off.
When
Start web browsing
or
Use for
is selected, the WLAN
wizard automatically creates an access point for the selected
WLAN. The access point can also be used with other
applications requiring WLAN connection.
If you select a secured WLAN, you are asked to enter the
relevant passcodes. To connect to a hidden network, you
must enter the correct service set identifier (SSID).
To use the found WLAN for a net call connection, select the
row showing the status,
Use
for, the desired net call service,
and the WLAN to be used.
Connection manager
Select
Menu
Ctrl. panel
Connectivity
>
>
Cyan
Cyan
View and end active
connections
To see the open data connections, select
connections.
To view detailed information about network connections,
select a connection from the list and
type of information shown depends on the connection type.
To end the selected network connection, select
Disconnect.
To end all active network connections simultaneously, select
Options
Disconnect
all.
>
Search for WLAN
To search for WLANs available within range, select
WLAN
networks. The available WLANs are listed with their
network mode (infrastructure or ad-hoc), signal strength,
and network encryption indicators, and whether your device
has an active connection with the network.
To view the details of a network, scroll to it, and press the
scroll key.
To create an internet access point for a network, select
Options
Define access
>
Conn.
mgr..
>
Magenta
Magenta
Yellow
Yellow
Black
Black
Active data
Options
> Details. The
Options
>
Available
point.
Advertisement
Table of Contents
