Connecting To A Pc - FujiFilm Finepix F10 Owner's Manual

6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER
— PictBridge FUNCTION
6
0 1 2 0
P P I C T C T B R I R I DG E G E
P R P R I N T N T W I T H T H D A T E D A T E
O K O K
P R P R I N T N T W I T HO U T O U T D A T E D A T E
P R P R I N T N T D P O F D P O F
7
1 0 2 0 3 0
T O TA L 0 0 0 0 9 0 0 0 0 9
T O TA L
0 1 0 1 S H E E T S S H E E T S
F R A M E F R A M E
Y E S Y E S C A N C E L C A N C E L
8
P R I N T I N G N G
1 1 1 1 9 1 9 1 9 1 9 S H E E T S S H E E T S
C A N C E L C A N C E L
Disconnecting the printer
Terminal
adapter
98
1 Press "a" or "b" to select "PRINT WITH DATE"
or "PRINT WITHOUT DATE". If "PRINT WITH
DATE" is selected, the date is imprinted on your
prints.
2 Press the "MENU/OK" button.
●
!
"PRINT WITH DATE" is not available when the camera is
connected to a printer that does not support date printing.
1 Press "d" or "c" to display the frame (file) for
which you want to specify PRINT settings.
2 Press "a" or "b" to set a value up to 99 as the
number of copies of the frame (file) to be printed.
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).
To specify more PRINT settings, repeat steps 1
and 2.
3 Always press the "MENU/OK" button after the
settings are completed.
●
!
Movie images cannot be printed.
Press the "MENU/OK" button to download the data
to the printer and start printing the specified
number of prints.
●
!
Press the "DISP/BACK" button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
1 Check that "PRINTING" is not displayed on the
camera's screen.
2 Turn the camera off. Unplug the Terminal
adapter.

6.3 CONNECTING TO A PC

6.3.1 Connecting to a PC
The "Connecting to a PC" section explains how to connect the camera to your PC using the USB
cable (mini-B) and describes the functions you can use once the camera and PC are connected.
If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the
AC power adapter when connecting the camera to a PC.
Refer to Section 5 the first time you connect the camera to your PC.
Install the software first. Do not connect the camera to the PC before installing
all the software.
¶ DSC (Mass storage device) mode
This mode provides a simple way to read images from an xD-Picture Card and store images onto
an xD-Picture Card.
1
Gold marking
2
1 0 0 3
2 0
D S C D S C
S E T S E T
1
S E T S E T
2
E N G L I L I S H S H E N G
S E T S E T
3
4 N T S C N T S C N T S C N T S C
CD-ROM
(Software for FinePix
Insert an xD-Picture Card into the camera.
w
1 Press the " " button for about 1 second to turn
the camera on in Playback mode.
¶ ò
2 Select " " DSC in " " USB MODE in the
˜
" " SET-UP menu (➡P.81).
3 Press the "POWER" button to turn the camera
off.
Continued
CX
)
6
99