Table of Contents
Advertisement
6.2.
Battery
6.2.1.
Battery Installation
Note:
• Use only the included rechargeable batteries HHR-55AAAB
or HHR-4EPT.
6.2.2.
Battery Charge
6.2.3.
Battery Strength
6.2.4.
Panasonic Ni-MH Battery
Performance (included batteries)
Note:
• It takes 10 hours to fully charge the batteries, however, you
can use the handset if
charging.
• It is normal for batteries not to reach full capacity at the initial
charge. Maximum battery performance is reached after a
few complete cycles of charge/discharge (use).
• Actual battery performance depends on a combination of
how often the handset is in use and how often it is not in use
(standby).
• Even after the handset is fully charged, the handset can be
left on the base unit without any ill effect on the batteries.
• The battery strength may not be displayed correctly after you
replace the batteries. In this case, place the handset on the
base unit and charge for at least 10 hours.
13
KX-TG1070SLB/KX-TGA107EXB
remains on the display while
Advertisement
Table of Contents
