FujiFilm Finepix 40i Quick Start Manual page 15

3. Check whether File Exchange is active.
To use a media that is supported by the camera, the File Exchange utility supplied
with Mac OS must be running. Select the Extensions Manager in the Control
Panels and check that the File Exchange check box is ticked. If not, click in the
box so that an [X] appears and then restart your Macintosh.
4. Copy the driver to the Extensions folder.
1 When you load the enclosed
CD-ROM into the CD-ROM drive,
the CD-ROM icon appears on the
desktop.
2 Double-click the CD-ROM icon,
open the "USB Mass Storage
Driver" folder and then the
"English" folder. The English folder
contains 2 files:
"USB04CB_StorageShim" and
"USB04CB_StorageDriver". Copy
these 2 files to the Extensions
folder inside the System folder on
the startup disk.
3 Select "Restart" from the "Special"
menu to restart your Macintosh.
28
5. Connect the camera to your Macintosh.
1 Load the media into the camera, switch the camera on and set the Mode dial to
"Playback" mode.
NOTE
Use media that contain photographs shot on a FUJIFILM digital camera.
2 Use the USB cable to connect the camera to the USB port on your Macintosh.
NOTE
• Connect the cable to the USB port on
your Macintosh. If the cable is
connected via a USB hub, the software
may not operate correctly. If the PC
has 2 or more USB ports, any USB
port can be used.
• Push the USB connector in fully to
ensure that the connection is secure.
If the cable is not securely connected,
the software will not operate correctly.
Refer to the Owner's Manual supplied
with the camera for details.
• To avoid communication errors, use
the USB cable provided in this
package and do not use an extension
cable.
3 Setup is complete when a new removable disk icon
(the connected camera) appears on the desktop.
Macintosh
29